British History, Culture & Sports, History of Freedom, Heroes, Inventors, Brits at their, English country scene

tội cá độ bóng đá qua mạng | All Posts

Happy Birthday, Big Ben, and many happy returns


Image: Wiki

The clock in St Stephen's Tower, Westminster, affectionately called Big Ben, began keeping time 150 years ago on May 31st 1859. Big Ben, the bell which gave its name to the tower, began to boom on the same day, according to Whitechapel Foundry.

Whitechapel took over when the first bell, cast by another foundry, cracked irreparably.

In 1844, Parliament had decided that the new buildings for the Houses of Parliament, by then under construction, should incorporate a tower and clock. The commission for this work was awarded to the architect Charles Barry, who asked AWN Pugin, the creator of the Gothic Revival, to design the tower and clock face.


The idea and the execution were brilliant.
Image: David Iliff, Wiki, Commons License

Barry invited just one clockmaker to produce a design and quotation, but the rest of the trade objected, demanding the job be put out to competitive tender. The Astronomer Royal, George Airy was appointed to draft a specification for the clock. One of his requirements was that
the first stroke of the hour bell should register the time, correct to within one second per day. . .

Most clockmakers considered such accuracy unattainable. . .and lobbied for a lesser specification. However, Airy was adamant that the first specification be adhered to. Due to this impasse, Parliament appointed barrister Edmund Beckett Denison as co-referee with Airy. Edmund Beckett Denison (later Sir Edmund Beckett, the first Baron Grimthorpe), was a difficult man. He was described by one writer as

. . .zealous but unpopular, self-accredited expert on clocks, locks, bells, buildings, as well as many branches of law, Denison was one of those people who are almost impossible as colleagues, being perfectly convinced that they know more than anybody about everything - as unhappily they often do.

Denison decided to apply himself to the problem of the clock. It was 1851 before he came up with a design which could meet the exacting specification. The clock Denison designed was built by E.J. Dent & Co., and completed in 1854.

The five-and-a-half ton clockwork mechanism keeps the time accurate to the second. (On top of the clock's pendulum is a small stack of old penny coins, which are laid on or removed to alter the pendulum and keep the clock precise.)

The casting of Ben involved horse manure (its open, fibrous structure allows air to escape) goat hair, sand and clay. This loam was used for the bell's cope or outer cast and was built up on bricks to form the inner core mould as well. After the two moulds are oven-dried, "the cope is lowered over the core and sealed at the bottom, and molten metal is poured into the gap between" (Telegraph). It took Big Ben 20 days to cool. Afterwards, delicate pieces of metal were shaved off to adjust its tone. But all that went for naught.


Big Ben and the quarter bells. Every quarter hour, the quarter bells chime.
Image: Westminster Guide

The 13-and-a-half-ton bell looked good, but its first months, after a processional parade through London and slow ascent up the Tower, were problematic. The metal was intentionally brittle - to give it a hum - but the hammers installed by the baron to smite the bell were too heavy. The bell cracked. This was a disaster, which ended happily. Ben was repaired and ever after had a personal bong to its tone.

Bell, clock and tower have withstood tempests of ice and snow and the blast of war. Big Ben continued to boom even when the House of Commons was destroyed by German bombs, and seemed to many to signal Britain's undaunted spirit.

You can hear Big Ben here.

George Mears, the master bellfounder and owner of Whitechapel who undertook the casting, estimated £2401 for the cost, but this was offset by the metal he was able to reclaim from the first bell. The actual invoice for Big Ben was £572. He and Pugin, Airy and Barry and Baron Grimthorpe made a fine team.

Comments (2)


You report that, "Parliament appointed barrister Edmund Beckett Denison..."

Even in the mid-19th century, the lawyers were taking it upon themselves to assume that they were the ones to do every thing, just as today! Astounding! I had no idea that the practice was that old. No wonder we are in such terrible trouble.

One might have expected the job to be given to a master clock maker, a master mechanic, etc., but a lawyer... Oh, my!

(full disclosure: I am an engineer, long ago employed by Hamilton Watch Company.)

Alan Monro:

For a fuller history of "Big Ben" I would recommend (if you can find a copy) a book written by JOHN DARWIN. ISBN number 0-7090-2811-7 (My copy is signed by him.) Mr Darwin became resident engineer of the palace of Westminster. The book has a wealth of information and some interesting pictures. It has about 186 pages. Well worth hunting out.

On October 6th of this year, I was shown around the houses and noticed that all the large/ small clocks on the walls between rooms seemed to pulse every half second. I am not a clock or watch repairer, but I have an interest in clocks. As all the large/small WALL clocks seemed to pulse at the same time, I asked my guide, "Where is the master clock?" They had never noticed the "jumps".

Can anyone enlighten me? Is there a "Master clock" on the premises or where do they get their "Pulses" from?

baccarat bịp_kinh nghiệm chơi cờ bạc_bóng đá trực tuyến

(Please do give us your name or the name you write under in the form below and your URL if you have one. Your comment may take a little time to appear. Thanks for waiting.)